Rockwell Automation FactoryTalk AssetCentre Machine Edition Installation Manual - Manual (Page 18)

F ACTORY T ALK A SSET C ENTRE M ACHINE E DITION I NSTALLATION G UIDE
14
• •
•
•
•
computer. Components that will be installed are indicated with a computer icon and a
checked box. You cannot select or clear the check boxes in this window.
Click Start to begin the installation process.
6. Follow the on-screen installation instructions for the components that need to be
installed.
The following components are checked for and installed or configured during the
installation:
„
Windows Installer 3.1 v2.
„
Microsoft .NET Framework. The FactoryTalk AssetCentre Machine Edition
software requires that Microsoft .NET Framework versions 1.1 (with Service Pack 1)
and 2.0 be installed on your computer. If these components are not already installed on
your computer, the setup program will install them.
„
FactoryTalk Services Platform 2.10.00 (CPR 9) or 2.10.01 (CPR 9 SR 1). See
“Installing FactoryTalk Services Platform,” next.
„
Check and Configure FTSP. This occurs during the FactoryTalk Services Platform
installation. See the substeps in step 4 on page 15.
„
FactoryTalk AssetCentre Server. See “FactoryTalk AssetCentre server installer” on
page 16.
„
FactoryTalk AssetCentre Common Components. See “FactoryTalk AssetCentre
Common Components installer” on page 18.
„
FactoryTalk AssetCentre Client host. See “FactoryTalk AssetCentre Client
installer” on page 18.
„
RSLinx Classic Lite. See “Installing RSLinx Classic Lite” on page 19.
„
FactoryTalk AssetCentre RA Disaster Recovery Agent. See “FactoryTalk
AssetCentre Agent installer” on page 20.
„
FactoryTalk AssetCentre Agent Host. See “FactoryTalk AssetCentre Agent
installer” on page 20.
If you see a red “X” next to one or more components, this means that the installer cannot
determine whether the component should be installed. Contact Technical Support using the
contact information provided on the copyright page at the beginning of this guide.
The installation of some components may require you to restart your computer. If this is the
case and the setup program has not finished installing all of the necessary components, the
setup program will restart the next time you log on to your computer.