Installing rslinx enterprise, Using the windows firewall configuration utility – Rockwell Automation FactoryTalk AssetCentre Machine Edition Installation Manual User Manual

Page 25

Advertising
background image

2

I

NSTALLING

F

ACTORY

T

ALK

A

SSET

C

ENTRE

M

ACHINE

E

DITION

21

• •

When finished, the setup program opens the RSLinx Enterprise installer.

Installing RSLinx Enterprise

See “Installing FactoryTalk AssetCentre Machine Edition software” on page 13 for the steps to
get to this part of the installation.

RSLinx Enterprise is required for your FactoryTalk AssetCentre system to communicate
with PanelView Plus operator interfaces. RSLinx Classic Lite is still required even if you
install RSLinx Enterprise.

If you have RSLinx Enterprise (version 5.00.00 or higher) installed on your computer, you
do not need to install this component (and the FactoryTalk AssetCentre agent installation
program will not ask you to install it). If you do not have RSLinx Enterprise, version 5.17
will be installed.

1. On the Welcome to FactoryTalk Services page click Install RSLinx Enterprise.

2. On the next menu, click Install RSLinx Enterprise.

3. Follow the on-screen instructions.

4. When prompted for a serial number, enter any 10-digit number, for example

1234567890.

5. In the Setup Type page of the installation wizard, select Standard Feature Set

Installation, and then click Next.

6. Continue following the on-screen instructions to complete the installation.

7. On the InstallShield Wizard Completed screen, click Finish.

8. Click Exit on the RSLinx Enterprise installation menu.

9. Restore the Install FactoryTalk AssetCentre Client window and click Continue.

Using the Windows Firewall Configuration Utility

See “Installing FactoryTalk AssetCentre Machine Edition software” on page 13 for the steps to
get to this part of the installation.

The Windows Firewall Configuration Utility will run whether you are using the firewall
or not.

If you have a firewall other than Windows Firewall, use the information in “Network requirements”
on page 4 a
nd “Additional ports you may have to open” on page 35 to configure your firewall to
allow communication through the appropriate ports and with specific processes.

Advertising