Rockwell Automation FlexPak Plus NRG DC Drive - Manual (Page 2)

1
SECTION 1
INTRODUCTION
1.0 General - This manual familiarizes the user with
the three phase, FlexPakt Plus DĆC VKSr drive controlĆ
ler. (Refer toFigure 1.1.) It describes assembly and
installation procedures, gives a general overview of opĆ
erations, and contains information on troubleshooting,
maintenance, the ordering of spare parts, and specifiĆ
cations.
The manual should be read before performing installaĆ
tion or startĆup activities. Also, there are certain fundaĆ
mental warnings which must be kept in mind at all
times. These are:
DANGER
THE DRIVE SYSTEM SHOULD BE INSTALLED,
ADJUSTED AND SERVICED BY QUALIFIED
ELECTRICAL MAINTENANCE PERSONNEL FAĆ
MILIAR WITH THE CONSTRUCTION AND OPĆ
ERATION OF ALL EQUIPMENT IN THE SYSTEM.
PERSONAL INJURY AND/OR EQUIPMENT
DAMAGE MAY OCCUR IF INDIVIDUALS ARE
NOT FAMILIAR WITH THE HAZARDS RESULTĆ
ING FROM IMPROPER OPERATION.
Figure 1.1 - FlexPak Plus Complete w/Optional Status Diagnostic Indicator and Super RPM Motor