Rockwell Automation 2071-APx Kinetix 3 Drive Systems Design Guide - Manual (Page 6)

6 Rockwell Automation Publication GMC-RM005B-EN-P - September 2013
Kinetix 3 Drive Systems
Optional Drive Accessories
Kinetix 3 Input Power Accessories Example
Motor-end cable connector kits, for use when building your own cables, are also available. Refer to the Kinetix Motion
Accessories Technical Data, publication
GMC-TD004 , for detailed descriptions and specifications of servo drive
accessories.
Drive Accessory Description Cat. No.
I/O cable (applies to flying-lead cables as an
alternative to drive-mounted breakout boards)
50-pin, flying-lead cable for I/O (IOD) connections 2090-DAIO-D50xx
Control and configuration serial cables
Control interface cable for drive-to-drive configurations 2090-CCMDSDS-48AAxx
Control interface cable for drive-to-1203-USB converter 2090-CCMUSDS-48AAxx
2090 AC line filter
250V AC, 50/60 Hz, single-phase 2090-XXLF-TC116
520V AC, 50/60 Hz, three-phase 2090-XXLF-TC316
Connector set
Replacement connectors for general purpose input power (IPD), shunt
resistor (BC), and motor power (MP)
2071-CONN1
Single-phase or Three-phase
Input Power
Kinetix 3
Servo Drive
2090-XXLF-TCxxx
AC Line Filter
(optional equipment)