Baumfolder BAUM 26_30: Folder 1st Station Contfeed - Manual (Page 19)

PAGE 19 TP10476-1
07) Output Indicator
The output indicator lights when the Batch Preset PV is reached and the user has selected a
batching option. The output indicator is lit during the time the batching option is active.
Batching options are Feed interruption, Marking table, Speed up table or Kicker.
Machine Control Pushbuttons
08) Main Drive Start
09) Main Drive Stop
10) Pump Start
11) Pump Stop
12) Feeder Start
13) Feeder Stop
14) Pile Feeder Up, Continuous Feeder Start
15) Pile Feeder Stop, Continuous Feeder Stop
16) Pile Feeder Down, Continuous Feeder Reverse
17) Emergency Stop
Keypad Buttons for Selection Adjustments
18) Show Output Count
19) Show Batch Count and Number of Batches
20) Show Current Rate
21) Show Input Count
22) Learn Mode
23) Make Ready Mode
Keypad Buttons with Selection Indicators
24) Gap Minus
25) Gap Plus
26) Suction Length Minus
27) Suction Length Plus
28) Batch Preset Minus
29) Batch Preset Plus
30) Counter Setup Mode
31) Machine Setup Mode
32) Batching Time Minus
33) Batching Time Plus
34) Network Job Mode
35) Reset
36) Potentiometer Speed Adjust