Metrohm tiamo 2.3 Patch 1 - Manual (Page 292)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
276 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
<vs val=""/> Result status:
OK = The value is ok and has not been monitored.
OKL = The value is ok and has been monitored.
LE = The value has exceeded the limit and has not been
monitored.
LEL = The value has exceeded the limit and has been
monitored.
NV = The value is invalid and has not been monitored.
NVL = The value is invalid and has been monitored.
<vt val=""/> Result type:
TX = Text
NR = Number
DT = Date/Time
NA = Unknown
<vn val=""/> Result name.
<pr val=""/> Name of the CALC command the result has been gener-
ated with.
<un val=""/> Unit of the result.
<fo val=""/> Formula used for the calculation of the result.
– <fv dynamic=""> Variables used for the calculation of the result.
– <data>
<vr val="" /> Variable value.
<vs val=""/> Variable status (see above).
<vt val=""/> Variable type (see above).
<vn val=""/> Variable name.
</data>
</fv>
– <sme> Mean value of the result.
– <data>
<vr val="" /> Mean value with the number of decimal places defined
in the CALC command.
<vf val="" /> Mean value with full precision.
<vs val=""/> Variable status (see above).