Metrohm tiamo 2.3 Patch 1 - Manual (Page 310)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
294 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
<sensorName val="" /> Sensor name.
<sensorType val="" /> Sensor type.
<sensorOrderNo val="" /> Order number of the sensor.
<sensorSerialNo val="" /> Serial number of sensor.
<sensorInitDate val="" /> Date on which the sensor was used for the first time.
<sensorSlope val="" /> Slope of the sensor.
<sensorCellConst val="" /> Cell constant of the conductivity sensor.
<sensorPh0 val="" /> Electrode zero point of the pH sensor.
<sensorIonVa val="" /> Ion (valency) of the ISE sensor.
<sensorE0 val="" /> Electrode zero point of the sensor.
<sensorC val="" /> Blank value of the ISE sensor.
<sensorCalTemp val="" /> Calibration temperature.
<sensorCalDate val="" /> Calibration date.
<sensorCalMethod val="" /> Calibration method.
<sensorCalUser val="" /> User
<sensorCalMeasInput val="" /> Measuring input at calibration.
<sensorEltTime val="" /> Date of the electrode test.
<sensorEltResult val="" /> Result of the electrode test.
<thermoProbe> ... </thermoP-
robe> Data of the thermoprobe sensor.
</sensorData>
</Sensor>
</usedSensors>
4.4.4.3.11 XML export - Sample solutions (TC conductivity)
XML export
– <TcSampleSolutions
dynamic=""> Sample solutions (TC conductivity)
– <TcSampleSolution> Data on sample solution (TC conductivity).
– <tcSolutionName> ... </tcSolu-
tionName> Name of the sample solution (TC conductivity).
– <tcAssignDate> ... </tcAssign-
Date> Assignment date for sample solution (TC conductivity).