Metrohm tiamo 2.3 Patch 1 - Manual (Page 70)

2.4 Formula editor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
54 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1
Designation Description Commands
TMF Transmission factor (dimension-
less) MEAS TMF
.TOL Tolerance within which a meas-
ured peak can be assigned to a
calibration wavelength. CAL Spec
.TOU Timeout status: 1 = Timeout
expired; 0 = Timeout not
expired RECEIVE, TRANS-
FER, SCAN
.UNI Mapping unit which is defined in
the configuration for an IO port
(Text) ANALOG IN,
ANALOG OUT
.VAL Value of the command variables
(optional, i.e. Command-
name.Portname' = Command-
name.Portname.VAL') (Num-
ber). The value returned is the
value after the ending of the com-
mand. ANALOG IN,
ANALOG OUT,
DIGITAL IN, DIGI-
TAL OUT
.VAR Variance of the calculated result
of the standard addition in the
selected unit STDADD
.VOL Dosed volume STDADD, ADD,
DOS, LQH
2.4.3.5 Result variables
Dialog window: Formula editor ▶ Variables
Result variables are method-specific and are defined in the CALC com-
mand of the method. The field Variables of the formula editor lists all
Result variables which are available for the current method.
Syntax
'RS.Result name.Variable identification'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.testTime.UNI'
You can select the method variables directly in the formula editor under
Variables
▶ Result Variables in order to avoid syntax errors.