Metrohm 789 Robotic Sample Processor XL User Manual
Metrohm Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1 Introduction
- 2 Installation
- 2.1 Installation flow chart
- 2.2 Instrument setup
- 2.3 Data transmission connections
- 2.4 Connecting up accessories
- 2.4.1 Connecting rinsing and aspiration equipment
- 2.4.2 Attaching the tubing
- 2.4.3 Installing the titration accessories
- 2.4.4 Assembling pipetting accessories
- 2.4.5 Installing a double-hollow needle
- 2.4.6 Spray nozzles
- 2.4.7 Magnetic stirrer
- 2.4.8 Mounting the stand support
- 2.4.9 Installing the collection trough
- 2.4.10 Sample racks
- 2.4.11 Mounting the safety shield
- 2.5 Start-up
- 3 Operation
- 4 Service, maintenance, errors
- 5 GLP validation – diagnosis
- 6 Annex
- 6.1 Technical data
- 6.1.1 Keypad
- 6.1.2 Interfaces
- 6.1.3 MSB connections
- 6.1.4 Pumps and pump connections
- 6.1.5 Swing Head connection
- 6.1.6 Lift
- 6.1.7 Turntable
- 6.1.8 Stirrer connection (DIN socket)
- 6.1.9 Mains connection
- 6.1.10 Safety specifications
- 6.1.11 Electromagnetic compatibility (EMC)
- 6.1.12 Ambient temperature
- 6.1.13 Dimensions and materials
- 6.2 Standard methods
- 6.3 Standard equipment
- 6.4 Warranty and conformity
- 6.1 Technical data
- 7 Index