Metrohm 789 Robotic Sample Processor XL - Manual (Page 71)

3.2 Configuration
Metrohm Sample Processor, Operation 63
Rack position of the special
beaker >>special positions 1
rack position 0
etc. up to special beaker 16
0…number Pos.
0 = not defined
>rack definitions
>>store rack
Save rack definitions
In order to store modifications to the definition of a sample rack the submenu
>>store rack is selected.
>store rack
name: 6.2041.310
Name of rack
10 ASCII characters
With the <SELECT> key you can select one of the existing rack names. The
rack data is stored with <ENTER>. Any rack name can be used. The input
of any rack name can be made directly via the numerical keys or in the text
input mode, see p. 55. Selection of the alphanumerical characters with the <
and > keys or <PRINT> and <RACK>.
>rack definitions
>>delete rack
Delete rack definitions
The submenu >>delete rack must be selected if a rack definition is to be
deleted.
>delete rack
name: 6.2041.310
Name of the rack
The <SELECT> key can be used to select one of the existing rack names.
<ENTER> confirms the selection. <QUIT> stops the deletion process.
Before the deletion a question appears.
>rack definitions
delete 6.2041.310 ?
<ENTER> confirms the deletion. <QUIT> stops the deletion process.
When the submenu ' >rack definitions ' is exited without saving modified
data a request appears about saving the rack data.
>rack definitions
overwrite 6.2041.310 ?
Confirm the question (store the rack definitions) by pressing the
<ENTER> key. Reject storage with <QUIT>.