Metrohm 789 Robotic Sample Processor XL - Manual (Page 29)

1.7 The keypad
Metrohm Sample Processor, Introduction 21
Auxiliary commands
.
<
PRINT
The <PRINT> key is used to print out a report. The following can be
selected: parameter report (method), configuration report, list of
stored methods, all reports.
The type of report can be selected with <SELECT>.
e. g.
Print: config
The selection of the printer type and the settings of the RS232 inter-
face must be made in the configuration menu under >RS232 Set-
tings , see p. 37.
>
*
RACK
-
With the <RACK> key the sample rack can be initialized. The con-
nected peripheral devices (e.g. Dosimats, Dosinos) are not affected
by this.
The sample rack and lift (both lifts in 2-tower versions) are moved to
the zero position and automatic rack recognition is carried out.