Banner Q60 Background Suppression Series - Manual (Page 5)

page 5
Q60V Series Adjustable-Field Sensors –
Visible Red Emitter
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
To set a delay, single-click the appropriate button or pulse the remote wire as shown in Figure 14
to enable the process. Then use the + or – button or the appropriate remote wire pulse
procedure to increase or decrease the delay (single-click adjusts the delay by one step at a time,
and holding the button in provides a rapid increase/decrease).
NOTE: Remote wire available on models Q60BB6AFV(Q1) only.
T = 40 – 800 ms
Press and Hold > 800 ms unless otherwise noted
ON OFF DELA
Y
–
DELA
Y
+
Single-Click
T >800 ms
ON OFF DELA
Y
–
DELA
Y
+
Single-Click
ON OFF DELA
Y
–
DELA
Y
+
Press and Hold
T >800 ms T >800 ms >800 ms
Push Button
Remote
Increase ON Delay – 4-second time-out
Decrease ON Delay – 4-second time-out
Push Button
ON OFF DELA
Y
–
DELA
Y
+
Single-Click
ON OFF DELA
Y
–
DELA
Y
+
Single-Click
ON OFF DELA
Y
–
DELA
Y
+
Press and Hold
Remote
T >800 ms T T >800 ms T >800 ms T >800 ms
Increase OFF Delay – 4-second time-out
Decrease OFF Delay – 4-second time-out
Push Button
ON OFF DELA
Y
—
DELA
Y
+
Single-Click
Push Button
ON OFF DELA
Y
—
DELA
Y
+
Single-Click
ON OFF DELA
Y
—
DELA
Y
+
Single-Click
ON OFF DELA
Y
—
DELA
Y
+
Press and Hold
ON OFF DELA
Y
—
DELA
Y
+
Single-Click
ON OFF DELA
Y
—
DELA
Y
+
Press and Hold
Remote
T T T T T >800 ms T >800 ms >800 ms T >800 ms
Remote
T T T T T >800 ms T T >800 ms T >800 ms T >800 ms
Enter ON Delay Setup
Enter ON Delay Setup
Enter ON Delay Setup
Enter ON Delay Setup
Step Increment Rapid Increment
Step Decrement Rapid Decrement
Enable Delay Increment Step Increment Rapid Increment
Enable Delay Decrement Step Decrement Rapid Decrement
Step Increment Rapid Increment
Step Decrement Rapid Decrement
Enable Delay Increment Step Increment Rapid Increment
Enter OFF Delay Setup
Enter OFF Delay Setup
Enter OFF Delay Setup
Enter OFF Delay Setup Enable Delay Decrement Step Decrement Rapid Decrement
Figure 14. ON/OFF Delay configuration procedure