Document Outline

• Contents
• 1 The SureCross® Performance Wireless Network
  • 1.1 SureCross® Performance Gateways and Nodes
  • 1.2 SureCross® Performance GatewayPro
  • 1.3 DX83 Ethernet Bridge Overview
  • 1.4 Host Controller Systems
  • 1.5 What is FlexPower®?
  • 1.6 SureCross User Configuration Tool
• 2 Features
  • 2.1 DX80 Gateway and Node Components
  • 2.2 DX80 Gateway and Node Wiring Chamber
  • 2.3 DX80 GatewayPro
  • 2.4 DX83 Ethernet Bridge
  • 2.5 Wiring Diagrams
    • 2.5.1 5-pin Euro-Style Wiring for Gateways and DX85s
    • 2.5.2 5-pin Euro-Style Wiring for Nodes
    • 2.5.3 DX80...C Wiring
    • 2.5.4 Industrial Ethernet Wiring
  • 2.6 Dimensions
    • 2.6.1 Gateways and Nodes
      • DX80...C Gateways and Nodes
      • DX80...E Housings
    • 2.6.2 GatewayPro
    • 2.6.3 DX83 Ethernet Bridge
• 3 Setting Up Your Wireless Network
  • 3.1 Using Extended Address Mode
  • 3.2 Mixing Performance and Non-Performance Radios in the Same Network
  • 3.3 Applying Power to the Gateway or Node
  • 3.4 Bind Radios to Form Networks
  • 3.5 LED Behavior for the Gateways
  • 3.6 LED Behavior for the Nodes
  • 3.7 Conducting a Site Survey (Gateway and Nodes)
    • 3.7.1 SITE (Site Survey) Menu
      • Conducting a Site Survey Using the Menu System
    • 3.7.2 Interpreting the Site Survey Results
    • 3.7.3 Site Survey Troubleshooting
    • 3.7.4 Conduct a Site Survey Using Modbus Commands
• 4 Installing Your SureCross® Radios
  • 4.1 Mounting SureCross Devices Outdoors
    • 4.1.1 Watertight Glands and NPT Ports
  • 4.2 Other Installation Requirements
  • 4.3 Installation Quick Tips
    • 4.3.1 Create a Clear Communication Path
    • 4.3.2 Increase the Height of the Antennas
    • 4.3.3 Collocated Radios
    • 4.3.4 Be Aware of Seasonal Changes
  • 4.4 Basic Remote Antenna Installation
    • 4.4.1 Weatherproof Remote Antenna Installations
    • 4.4.2 Antenna Installation
    • 4.4.3 Mount a Dome Antenna to the Enclosure
    • 4.4.4 Use an N-Type, Pole-Mounted Antenna
• 5 Advanced Setup Instructions and Additional Information
  • 5.1 DX80 Menu Structure
    • 5.1.1 RUN Menu
    • 5.1.2 DINFO (Device Information) Menu
    • 5.1.3 FCTRY (Factory) Menu
    • 5.1.4 SITE (Site Survey) Menu
    • 5.1.5 DVCFG (Device Configuration) Menu
    • 5.1.6 DERR (Device Error) Menu
  • 5.2 Web-based Configuration
    • 5.2.1 Accessing the Web-based Configuration Screens
    • 5.2.2 Changing the IP Address
  • 5.3 Binding Mode: What does it do?
  • 5.4 More Details About Extended Address Mode
    • 5.4.1 Manually Choosing an Extended Address Code - Gateway
    • 5.4.2 Manually Choosing an Extended Address (Binding) Code - Node
    • 5.4.3 Setting the Network ID in Extended Addressing Mode
    • 5.4.4 Automatic Binding Using the Menu Navigation
  • 5.5 Setting the Maximum System Devices
  • 5.6 Storage Mode and Sleep Mode
  • 5.7 Modbus Communication Parameters
    • 5.7.1 Setting the Slave ID on a DX80 Gateway
    • 5.7.2 Setting the Baud Rate
    • 5.7.3 Setting Parity
  • 5.8 Default Output Conditions
    • 5.8.1 Host Link Failure
    • 5.8.2 Gateway Link Failure
    • 5.8.3 Node Link Failure
  • 5.9 Units Defined
    • 5.9.1 Interpreting Register Values in the Banner Wireless System
  • 5.10 Setting up the Wireless Network Using the Rotary Dials
    • 5.10.1 Rotary Dial Address Mode
    • 5.10.2 Setting the Network ID Using the Rotary Dials
    • 5.10.3 Setting the Device Address Using the Rotary Dials
    • 5.10.4 Setting Up Channel Search Mode
      • Channel Search Mode Flowchart
• 6 System Layouts
  • 6.1 Stand-Alone Systems
    • 6.1.1 Mapped Pairs (DX70)
    • 6.1.2 Gateway with Multiple Nodes (DX80)
    • 6.1.3 Gateway Configured as a Modbus Master
  • 6.2 Modbus RTU
    • 6.2.1 Modbus RTU Host Controlled Operation
    • 6.2.2 Modbus RTU with Multiple Slave Devices
    • 6.2.3 Modbus RTU with Multiple Slave Devices - Layout 2
  • 6.3 Modbus/TCP and EtherNet/IP
    • 6.3.1 Host Connected - DX80 GatewayPro
  • 6.4 Data Radios
    • 6.4.1 Data Radios
    • 6.4.2 Data Radios with DX85 Modbus RTU Remote I/O Devices
    • 6.4.3 Data Radios with a Gateway as the Modbus Master
• 7 Sensor Connections
  • 7.1 Discrete Inputs
    • 7.1.1 Discrete Inputs, Sourcing
    • 7.1.2 Discrete Inputs, Sinking
    • 7.1.3 Discrete Inputs, MINI-BEAM
  • 7.2 Discrete Outputs
    • 7.2.1 Discrete Outputs
  • 7.3 Analog Inputs
    • 7.3.1 Analog Inputs, Powered using SureCross Device Terminals
    • 7.3.2 Analog Inputs, Powered from Switch Power
    • 7.3.3 Analog Inputs, Powered Externally
    • 7.3.4 Analog Inputs, Temperature Sensors
    • 7.3.5 Analog Inputs, QT50U Long-Range Ultrasonic Sensor
  • 7.4 Analog Outputs
    • 7.4.1 Analog Outputs, Three-Wire Sensors
    • 7.4.2 Analog Outputs, Drive Motor Controllers
• 8 SureCross Power Solutions
  • 8.1 10 to 30V dc Power
  • 8.2 What is FlexPower®?
    • 8.2.1 Switch Power (with FlexPower)
    • 8.2.2 FlexPower with Integrated Battery
    • 8.2.3 FlexPower® Solar Supply
  • 8.3 Battery Life Calculations
    • 8.3.1 Analog Configuration
    • 8.3.2 Discrete Configuration
    • 8.3.3 Temperature and Humidity Sensor
    • 8.3.4 Calculating Battery Life
  • 8.4 Example Solar Powered Systems
    • 8.4.1 Parallel Solar Systems
    • 8.4.2 Battery Backup Feature
    • 8.4.3 Autonomous Process Monitoring with Continuous Sensor Operation
    • 8.4.4 Wireless Network Range Extension
• 9 Maintenance
  • 9.1 Replacing the Main Body Gasket
  • 9.2 Replacing the Rotary Dial Access Cover
  • 9.3 Battery Replacement
    • 9.3.1 Replacing the Battery (DX81 and DX81H Battery Supply Module)
    • 9.3.2 Replacing the Integrated Battery (DX80 Models)
    • 9.3.3 Replacing the Battery (DX99...D Models)
• 10 Troubleshooting
  • 10.1 Startup Problems
  • 10.2 LED Message Codes
  • 10.3 LCD Message Codes
    • 10.3.1 Modbus Message Codes for Register 8
  • 10.4 Inputs and Outputs
  • 10.5 Radio Link Time-Out and Recovery (Non-Host Connected Systems)
• 11 SureCross Accessories
  • 11.1 Accessories
    • 11.1.1 Selecting an Enclosure
      • Enclosures
    • 11.1.2 Selecting an Antenna
      • Antennas: Rubber RP-SMA
      • Antennas: Dome
      • Antennas: Other
      • Antennas: Fiberglass N-Type
      • Antennas: Yagi N-Type
      • Antenna Cables: RP-SMA to RP-SMA
      • Antenna Cables: RP-SMA to N-Type
      • Antenna Cables: N-Type
      • Surge Suppressors
    • 11.1.3 Power Supplies
      • DC Power Supplies
      • FlexPower Supplies and Replacement Batteries
    • 11.1.4 Relays
    • 11.1.5 Brackets and Mounting Options
    • 11.1.6 Other Accessories
      • DX85 Modbus RTU Remote I/O Devices
      • Sensors
        • Sensors with a Serial Interface
        • Replacement Filters
      • Cables
        • Ethernet Cables
        • Adapter Cables
        • Splitter Cables
        • Euro-Style Cordsets - Single Ended
        • Euro-Style Cordsets - Double Ended
        • Other Cables
      • Hardware and Replacement Parts
      • Cable Glands and Plugs
      • Metal Housing Accessories
• 12 Radio Certifications
  • 12.1 FCC Certification, 900MHz
  • 12.2 FCC Certification, 900 MHz, 1 Watt Radios
  • 12.3 FCC Certification, 2.4GHz
  • 12.4 Certified For Use in the Following Countries
  • 12.5 Exporting SureCross Radios
• 13 Warnings
  • 13.1 Banner Engineering Corp Limited Warranty
  • 13.2 Contact Us
• Index