Banner U-GAGE Q45U Series—Analog - Manual

U-GAGE ™ Q45U Ultrasonic Sensors
Piezoelectric Proximity Mode Sensors with Push Button
Programming of Sensing Window Limits – Bipolar Discrete Outputs
Printed in USA 01/03 P/N 44177 Rev. D
Features
• Ultrasonic proximity detection from 100 to 1400 millimeters (4" to 55")
• Push button TEACH mode programming of sensing window limits
• Digital filtering for exceptional immunity to electrical and acoustic "noise"
• 12 to 24V dc operation
• Bipolar outputs: one NPN (sinking) and one PNP (sourcing)
• ON/OFF presence detection or HIGH/LOW level control are switch-selectable
• Wide operating temperature range of -25° to +70°C; models available with
temperature compensation
• Rugged design for use in demanding sensing environments; rated IEC IP67, NEMA 6P
• Choose models with integral 2 m (6.5') or 9 m (30') cable, or with Mini-style or
Euro-style quick-disconnect fitting
• External enable/disable feature for remote gating control
Ultrasonic
*Models with Temperature Compensation:
An increase in air temperature shifts both sensing window limits closer to the sensor. Conversely, a decrease in air temperature shifts both
limits further away from the sensor. The shift is approximately 3.5% of the limit distance for a 20°C change in temperature.
Temperature compensated models maintain the position of both sensing window limits to within 1% of each limit distance over the range of
from 0° to +50°C, and to within 2.5% over the full operating range of from -25° to +70°C.
**NOTES:
• 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45UBB63DA W/30).
• A model with a QD connector requires an optional mating cable, see page 8.
Range
100 mm - 1.4 m
(4" - 55")
Q45UBB63DAC
Q45UBB63DACQ
Q45UBB63DACQ6
Yes
2 m (6.5')
5-Pin Mini QD
5-Pin Euro QD
Models
Temperature
Compensation* Cable**
Supply
Voltage
Output
Type Response Time
Q45UBB63DA
Q45UBB63DAQ
Q45UBB63DAQ6
No
2 m (6.5')
5-Pin Mini QD
5-Pin Euro QD
12-24V dc
Bipolar
NPN/PNP
Programmable for
20, 40, 160, or 640
milliseconds
Q45U Series Proximity Mode Sensor Models
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
• Analog models also available
• Models with other ranges also available