Banner SureCross DX80 Wireless M-GAGE Node User Manual
Features, Models
Printed in USA
11/08
P/N 131598 rev. F
SureCross™ DX80 M-GAGE™ Node with
Integrated Battery
Integrated battery Node for vehicle detection
WARNING . . . Not To Be Used for Personnel Protection
Never use these products for personnel protection. Doing so could lead to serious injury or death.
These products do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
failure or malfunction can cause either an energized or de-energized output condition. Consult your current Banner Safety Products
catalog for safety products that meet OSHA, ANSI, and IEC standards for personnel protection.
Features
The SureCross™ DX80 is a radio frequency network system built around a Gateway and one
or more Nodes.
Internal three-axis magnetoresistive-based technology senses three-dimensional changes
•
to the Earth’s magnetic field caused by the presence of ferrous objects
Designed to minimize the effects of temperature changes and destabilizing magnetic
•
fields
Sensor learns ambient background and stores settings in non-volatile memory
•
Flex
•
Power™ technology driven by one lithium primary battery integrated into the housing
Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple
•
Access (TDMA) control architecture combine to ensure reliable data delivery within the
unlicensed Industrial, Scientific, and Medical (ISM) frequency bands
Transceivers provide two-way communication between the Gateway and Node, including
•
fully acknowledged data transmission
Lost RF links are detected and relevant outputs set to user-defined conditions
•
Sealed housing contains the battery, sensor, and antenna for a completely wireless
•
solution
For additional information refer to Banner Engineering’s website,
.
Model
FlexPower™
Frequency
I/O
DX80N9X1W0P0Z
3.6V dc Battery
900 MHz ISM Band
Internal M-GAGE™
(no additional I/O points)
DX80N2X1W0P0Z
2.4 GHz ISM Band
Models
900 MHz
2.4 GHz