Banner MICRO-AMP Series - Manual (Page 20)

Mounting Track
RS8K
The RS8K is a kit of parts which
comprise the socket portion of the
RS8 assembly. It is used to pro-
vide a socket for MICRO-AMP
modules that are installed onto
printed circuit boards. The RS8K
consists of a molded socket block
and 8 individual socket pins. A
nylon screw is included to affix
the socket block to the PC board.
The drill size for the pins is #50
(.070"; 1,8mm). Drill pattern di-
mensions are included with the
RS8K. The RS8 socket is the most fre-
quently used means of mounting
and wiring a MICRO-AMP mod-
ule. It consists of a socket with
two four-terminal connection
strips, all wired together onto a
PC board. The PC board assem-
bly slides into a 1 inch (25mm)
long PVC track which is used to
mount the entire assembly. A
hold-down screw keys the cor-
rect polarity of the module.
Dimensions, TR-100 Mounting Track
PVC mounting track for MICRO-AMP components is available in 6 and 12 inch
lengths for systems which use multiple components. For example, a 6-inch length will
accomodate one MPS-15 power supply plus two additional RS8 sockets with modules.
Longer lengths of mounting track may be supplied on a quote basis.
TR100-1 1 inch (25mm) long (supplied with RS8 socket)
TR100-4 4 inch (100mm) long (supplied with MPS-15 series power supply)
TR100-6 6 inch (150mm) long
TR100-12 12 inch (300mm) long
MICRO-AMP ® Accessories
Sockets
RS8
"A"
Dimension
1" (25mm)
4" (100mm)
6" (150mm)
12" (300mm)
Minimum
number of slots
1
2
3
8
Track Model
TR100-1
TR100-4
TR100-6
TR100-12
Banner Engineering Corp. 9714 Tenth Ave. No. Minneapolis, MN 55441 Telephone: (612)544-3164 FAX (applications): (612)544-3573
WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not
cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
!
WARNING
MICRO-AMP sensors, amplifiers, and logic modules do NOT include the self-checking redundant circuitry
necessary to allow their use in personnel safety applications. A sensor failure or malfunction can result in either an energized or a
de-energized output condition.
Never use MICRO-AMP products as sensing devices for personnel protection. Their use as safety devices may create an unsafe
condition which could lead to serious injury or death.
Only MACHINE-GUARD and PERIMETER-GUARD Systems, and other systems so designated, are designed to meet OSHA and ANSI machine safety
standards for point-of-operation guarding devices. No other Banner sensors or controls are designed to meet these standards, and they must NOT be used
as sensing devices for personnel protection.