Sc-3000 – Tweco SC-3000 User Manual
Page 45
Advertising
SC-3000
Manual 0-5100
4-5
OPERATION
SETTING OF OPERATION MODES
There are two Operation Modes. For more detailed explanation of modes and their effects go to section
4.11.
1. ARC Voltage
Cutting height will be set via arc voltage setting.
This mode can be used for test cuts.
Example: 130.0 V
2. Cutting Height
Cutting height will be directly set in mm.
This is the standard operation mode.
Example: 2.5 mm
Operator Terminal
Mode Select
ARC Voltage
Device Info
ESC
Parameter Cutheight
System Properties
OK
Display
Cutting Height
Ideal Voltage
Real Voltage
Main Menu
Cutting Height
Standard Setting
Art # A-08929
Advertising