Tweco SC-3000 - Manual (Page 47)

SC-3000
Manual 0-5100 4-7 OPERATION
COMMANDS AND STATUS
Operator Terminal
Status Info
Commands
Status
Corner ? Ref. Position ?
Kerf ?
Control active ?
Cycle active ?
Real Voltage 122.5 V
Reset
Regulator Off
Threshold Off
Scrap Cut
OK
Display
Cutting Height
Ideal Voltage
Real Voltage
i
OK
Commands and
Status
Linear Drive moves to upper reference
position
Clearance control is stopped
Initial position finding is stopped
Kerf and edge detection off
The Status shows the functions which are active during cutting.
Art # A-08931