Tweco 252i Fabricator - Manual (Page 24)

FABRICATOR 252i SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS AND WARNINGS 1-18 Manual 0-5155
1.10 Declaration Of Conformity
Manufacturer: Victor Technologies International, Inc.
Address: 82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Voltage
Directive’ (European Council Directive 73/23/EEC as amended by Council Directive 93/68/EEC) and to the National
legislation for the enforcement of this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to manu-
facture a unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
• ISO/IEC 60974-1 (BS 638-PT10) (EN 60974-1) (EN50192) (EN50078) (CSA E 60974-1) (UL 60974-1) (IEC
60974-5) applicable to welding equipment and associated accessories.
• For environments with increased hazard of electrical shock, Power Supplies bearing the S mark conform to
EN50192 when used in conjunction with hand torches with exposed cutting tips, if equipped with properly
installed standoff guides.
• Extensive product design verification is conducted at the manufacturing facility as part of the routine design
and manufacturing process. This is to ensure the product is safe, when used according to instructions in
this manual and related industry standards, and performs as specified. Rigorous testing is incorporated into
the manufacturing process to ensure the manufactured product meets or exceeds all design specifications.
Victor Technologies has been manufacturing products for more than 30 years, and will continue to achieve excel-
lence in our area of manufacture.
Manufacturers responsible representative:
Tom Wermert
Senior Brand Manager Tweco
Victor Technologies International, Inc.
16052 Swingley Ridge Road
Chesterfield, Missouri 63017 USA
3163339