Tweco 252i Fabricator - Manual (Page 27)

INTRODUCTION FABRICATOR 252i
Manual 0-5155 2-3 INTRODUCTION
2.07 Packaged Items
Fabricator 252i Part No. (W1004401)
- Fabricator 252i Power Supply
- 15 ft Tweco
® Fusion 250 Amp MIG Gun
- Velocity Contact tips (1 each)
• .030" (0.8 mm)
• .035" (0.9 mm)
• .045" (1.2 mm)
- Victor® Argon Regulator / Gauge & 10 ft. (3M) Hose
-Tweco WeldSkill 200 Amp electrode holder with 13 ft. (4 M) lead
-Tweco WeldSkill 200 Amp ground clamp with 10 ft. (3 M) lead
-Drive Rolls:
• .035" / .045" (0.9 to 1.2 mm) V Grooved Lower & Flat Upper (Fitted)
• .045" (1.2 mm) Flux Cored Roll
- Operating Manual
- 9 ft. (2.75 M) Power cord & NEMA 6-50P 230V AC Plug
A-12125
Figure 2-2: Packaged Items