186 ac/dc inverter installation/setup, 13 specification for tig torch – Tweco 186 DC Inverter User Manual
Page 48
INSTALLATION, OPERATION AND SETUP
3-18
Manual 0-5237
186 AC/DC INVERTER INSTALLATION/SETUP
Art # A-09828
Figure 3-9: Open Cylinder Valve
9. Open the cylinder valve completely to seal the valve packing. On gaugeless regulators, the indicator will
register the cylinder contents open.
CAUTION
Keep the cylinder valve wrench, if one is required, on the cylinder valve to turn off the cylinder quickly,
if necessary.
10. Attach the desired downstream equipment.
3.13 Specification for TIG Torch
1. SPECIFICATION FOR TIG TORCH PART NO: W4013600 TO SUIT THERMAL ARC 186AC/DC
TIG Torch Contents include:
1 x 26 TIG Torch with Long Back Cap, 12.5 ft lead length, 10.5" gas hose length, 9.5" control lead with 8 pin
plug and Rigid Head.
Remote Control Cartridge, Potentiometer with integrated on/off switch (installed).
A-11556
NOTE: The additional switches/controls below are interchangeable with the installed control in the TIG torch.