Tweco 9-8587 User Manual
Page 2
Advertising
Manual 0-5185
2
Art # A-08429
Lower
Screws
Lower
Screws
Slots
Upper
Screws
Figure 2
2. Remove the green air line that connects between the front and rear of the unit. To release the line from the con-
nector, press the ring back against the fitting and hold while pulling the tube out.
Figure 3: Contactor Location, Cutmaster True Std (left) and European Model w/CE Filter (right)
3. Remove the screws holding transformer wires ‘A’ and ‘B’ to the Main PCB and the ‘WORK1’ connection with
the T-20 Torx Screwdriver. See Figure 4.
Advertising