Tweco 9-8587 User Manual
Page 5
Advertising
Manual 0-5185
5
8. CM 12, 20, 25 & 40 UNITS WITH CE FILTERS: Remove wires #5 & #6 from the contactor and replace with the
harness included with the kit. This will involve clipping wires ties as in Figure 16. Remove J6 from the Main PCB
and replace with the harness connection. In addition the CM25 and CM40 units require wires #7 and #8 to be
replaced with contents of the modification kit, location ‘T1’ & ‘T2’. Use care to ensure that the wires are installed
in the same locations.
Figure 10: CONTACTOR COIL HARNESS
Figure 11: LOAD CONTACTOR WIRES 7, 8 & 9 Figure 12: LOAD WIRES 7 & 8 REMOVED
Figure 13: CE Filter Units ONLY. Remove and replace ‘J6’ Connection
Advertising