Viking Pump TSM280: Duralobe (Discontinued) - Manual (Page 59)

Page : 57
4.3.11 Strip Clean Single O-ring Seal
Fig 38
- Install o-ring (155) into the rotorcase (40).
Note: - During installing of the rotors to shafts care must be taken not
to damage or unseat the o-ring seal when inserting the rotor (41) into
o-ring (155).
- To disassemble reverse the above procedure.
- Before disassembling the seals, ensure pump is fully shutdown, refer to
section 3.5.
10 9
35
40
155
41