SARGENT Profile Series v.G1.5 Exit Devices - Manual (Page 12)

Supplemental – Individual “Door” Log Sheet for keypad programming
Lock Model:
Door Name:
Location:
Table 1: Main Codes - User Programmed “Door” Log
Function User Number Default Code User Programmed Code
Master Code 01 1234*
Supervisory Code 02
Table 2: User Programmed “Door” Log
User Name User Type User Number User Code Card/Fob#, Notes
*Note: If memory is cleared, you must reprogram Emergency code. The Master code resets
back to 1234*.
Keypad Programming Instructions for the Profile Series v. G1 Lock
6
© SARGENT Manufacturing Company
10
For installation assistance, contact SARGENT at 800-810-WIRE (9473)