SARGENT 9900 Series Mortise Lock User Manual
See other side for changing hand), Attention
ATTENTION:
*
TO PREPARE DOOR, USE INSTRUCTION SHEETS AND TEMPLATES
PACKED WITH EXIT DEVICE AND OUTSIDE TRIM.
*
PLEASE, LEAVE THIS INSTRUCTION SHEET FOR MAINTENANCE USE.
RHRB SHOWN
PP8700
RHRB SHOWN
PP8600
RHRB SHOWN
LP8600
RHRB SHOWN
IMPORTANT:
SEE PROPER INSTRUCTION SHEET FOR
EXIT DEVICE MOUNTING:
A6697 - FOR 8400 EXIT DEVICE;
A7012 - FOR 12-MD8400 EXIT DEVICE;
A7002 - FOR MD8600 AND 12-MD8600
EXIT DEVICES.
IMPORTANT:
SEE INSTRUCTION SHEET A7212 FOR
SP8700, 12-SP8700, PP8700,
12-PP8700, PR8700 AND 12-PR8700
EXIT DEVICE MOUNTING.
SECURELY FASTEN ADAPTER TO SPINDLE WITH
SET SCREW BEFORE MOUNTING.
IMPORTANT:
SEE INSTRUCTION SHEET A7330 FOR
SP8600, 12-SP8600, PP8600,
12-PP8600, PR8600 AND 12-PR8600
EXIT DEVICE MOUNTING.
IMPORTANT:
SEE INSTRUCTION SHEET A7393 FOR
LP8600, 12-LP8600, LS8600,
12-LS8600, LR8600 AND 12-LR8600
EXIT DEVICE MOUNTING.
IMPORTANT:
SEE INSTRUCTION SHEET A6770 FOR
(12-)8888, AND (12-)HC8800 EXIT DEVICES MOUNTING.
SECURELY FASTEN ADAPTER TO SPINDLE WITH
SET SCREW BEFORE MOUNTING.
700-8 SERIES CONTROL USED WITH
PR8710, PP8710 AND SP8710
CENTER AND TOP LATCH SURFACE
VERTICAL ROD EXIT DEVICES
700-6 SERIES CONTROL USED WITH
PR8600, PP8600 AND SP8600
CENTER AND TOP LATCH CONCEALED
VERTICAL ROD EXIT DEVICES
700-6 SERIES CONTROL USED WITH
LR8600, LP8600 AND LS8600
LOW PROFILE EXIT DEVICES
ADAPTER SCREW
MUST BE ON TOP
IN S T R U C T IO N S FO R IN S TA LLIN G 700,700-4,700-6 A N D
700-8 FR E E W H E E LIN G LE V E R H A N D LE C O N T R O L
US PATENT No. 4145900
(SEE OTHER SIDE FOR CHANGING HAND)
700-4 SERIES CONTROL USED WITH
8400,12-MD8400, MD8600 AND 12-MD8600
CONCEALED VERTICAL ROD EXIT DEVICES
8700
RHRB SHOWN
8816
RHRB SHOWN
8900
RHRB SHOWN
8900
RHRB SHOWN
8900
RHRB SHOWN
700 SERIES CONTROL USED WITH
8816 AND 9800 RIM EXIT DEVICES
700 SERIES CONTROL USED WITH
8900 AND 9900 MORTISE LOCK
EXIT DEVICES
700-8 SERIES CONTROL USED WITH
8800, 12-8800, 8888, 12-8888, HC8800 AND 12-HC8800
RIM TYPE EXIT DEVICES
700 SERIES CONTROL USED WITH
8700 AND 9700 SURFACE MOUNTED
VERTICAL ROD EXIT DEVICES
ADAPTER
ADAPTER SCREW
MUST BE ON TOP
MORTISE
CYLINDER
ADAPTER
RIM CYLINDER
Copyright © SARGENT Manufacturing. All rights reserved.
Reproduction in whole or in part without the express written
permission of SARGENT Manufacturing is prohibited.
A7261E