SARGENT 8500 Narrow Design Rim Exit Device - Manual (Page 2)

2
3
4
2
MARK VERTICAL AND HORIZONTAL
REFERENCE LINES ON DOOR
41" FROM FINISHED
FLOOR, OR AS
SPECIFIED
TAPE TEMPLATE ON INSIDE OF DOOR ALONG
REFERENCE LINES. SPOT AND DRILL HOLES.
MORTISE HOLES FOR OUTSIDE TRIM, IF
REQUIRED.
PREPARE DOOR
41" FROM FINISHED
FLOOR, OR AS
SPECIFIED
TAPE
SUPPLIED
HORIZONTAL
REFERENCE LINE (C OF
STRIKE AND LATCHBOLT
L
HOLE LOCATION
(EXAMPLE)
VERTICAL REFERENCE
LINE (C OF CHASSIS)
L
8500 / 12-8500
04, 44, 10, 40 FUNCTIONS
TRIM CYLINDER TAIL FOR 1/4" TO
1/2" PROJECTION THRU DOOR,
04 / 44 FUNCTIONS.
INSTALL CYLINDER ADAPTER ON
CYLINDER BEFORE INSTALLING
CYLINDER IN DOOR.
10/40 FUNCTIONS: SAME EXCEPT
NO CYLINDER.
8500 / 12-8500
13, 15, 43, 73, 74 Functions
USING VERTICAL AND HORIZONTAL
REFERENCE LINES, ATTACH TRIM,
OUTSIDE DOOR SURFACE.
THRU-BOLT CHASSIS TO TRIM,
INSIDE DOOR SURFACE, TOP AND
BOTTOM, AS SHOWN.
8504 SHOWN
Copyright © 2009-2012, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A6699N
13/16" FROM
SURFACE OF STRIKE
(REFERENCE STRIKE
TEMPLATE)
CYLINDER
ADAPTER
#34 RIM
CYLINDER
8513 SHOWN
NOTE:
CHASSIS SCREWS REQUIRED,
12-FIRE RATED DEVICES, AS SHOWN.
(2) #10-24 x 1 1/4" PH #8 OV. HD. MACHINE SCREWS