Installing the pto kit oil filter assembly, Pto k – Wheatheart S2000 Post Pounder User Manual

Page 29

Advertising
background image

W

HEATHEART

- P

OST

P

OUNDER

3. A

SSEMBLY

S2000 M

ODEL

3.3. I

NSTALLING

THE

PTO K

IT

IM15 R1

29

3.3.1. I

NSTALLING

THE

PTO K

IT

O

IL

F

ILTER

A

SSEMBLY

1. Connect the oil filter head to the oil filter bracket using two 5/16” x 1” bolts.
2. Secure the filter bracket and oil filter head to the frame assembly with a

U-bolt and two 1/2” nylock nuts (Figure 3.9 shows the mounting location of
the oil filter assembly).

3. Ensure a good seal between the oil filter and the oil filter head by rubbing a

small amount of clean hydraulic oil on the oil filter’s rubber seal. Install the
oil filter by carefully aligning the threads of each part together, and then
rotating the oil filter clock-wise until a tight seal is achieved.

Figure 3.10 Installing the Oil Filter Assembly

OIL FILTER

OIL FILTER HEAD

5/16” X 1” BOLTS

1/2” NYLOCK NUTS

U-BOLT

OIL FILTER BRACKET

Advertising