Wheatheart S2000 Post Pounder - Manual (Page 6)

1. I NTRODUCTION W HEATHEART - P OST P OUNDER
1.1. F EATURE O VERVIEW AND O PTIONS S2000 M ODEL
6 IM15 R1
1.1. FEATURE OVERVIEW AND OPTIONS
The S2000 Post Pounder connects to a tractor’s three-point hitch for mobility and
hydraulic power.
The S2000 Post Pounder is delivered packaged in two separate crates. One
crate contains the mast assembly, and the second crate contains the frame
assembly, the hugger assembly, and two support jacks.
Hydraulic power for the standard version of the S2000 Post Pounder is provided
by connecting directly to the tractor’s hydraulic system, including a return line
that is firmly connected to the tractor’s hydraulic fluid reservoir. See “Dri” on
page 40 for detailed information about hydraulic requirements.
The following options are available for the S2000:
• the PTO Kit
• the Hammer Ballast kit
Table 1.1 below lists the S2000 Post Pounder specifications.
Table 1.1 S2000 Post Pounder Specifications
Hammer Weight (without ballast) 320 lbs
Maximum Ballast 280 lbs
Total Weight (without ballast) 720 lbs
Transport Weight (with ballast) 1,000 lbs
Transport Height 8’ 8”
Width 4”1”
Length 3”4”
Hammer Height (Max) 9”4”
Hammer Height (Min) 4’
Hammer Stroke 5’4”
Maximum Post Size (Hugger) 12” diameter
Hydraulic Requirements 7 GPM@1500 PSI
Hammer Tilt Adjustment (front/back) 17º front/back from vertical
Hammer Tilt Adjustment (side-to-side) 16º left/right from vertical