Wheatheart S2000 Post Pounder - Manual (Page 56)

10. A PPENDIX W HEATHEART - P OST P OUNDER
10.1. H YDRAULIC SYSTEM S2000 M ODEL
56 IM15 R1
Figure 10.2 shows the S2000 PTO Kit Hydraulic diagram, and Table 10.2
describes the hydraulic connections.
Figure 10.2 S2000 Post Pounder Hydraulic Diagram, with PTO Kit Installed
* First part of hose H34X84, cut 37 inches from the 1/2” NPT connector
**Second part of hose H34X84, approximately 47” in length.
Table 10.2 Hydraulic Hose Connections, PTO Kit
REF PART NO. DESCRIPTION LOCATION
1 H34X25 (new) 3/4X25,1/2MNPT X 3/4MNPT return, valve to filter
2 H12X48P2W 1/2X48,1/2MNPT X 1/2MNPT valve to mast cylinder
3 H38X52 3/8X52,1/2MNPT X 1/2MNPT tilt cylinder lower, rod end
4 H38X55 3/8X55,1/2MNPT X 1/2MNPT tilt cylinder lower, cap end
5 H38X40P1 3/8X40,1/2MNPT X 1/2MNPT tilt cylinder top, rod end
6 H38X40P1 3/8X40,1/2MNPT X 1/2MNPT tilt cylinder top, cap end
7 H38X69 3/8X69,3/8MNPT X 1/2MNPT hugger, rod end
8 H38X65 3/8X65,3/8MNPT X 1/2MNPT hugger, piston end
9 H12X72P 1/2X72,1/2MNPT X 1/2MNPT pressure, valve to PTO pump
10 H34X84* (partial) 3/4X37,1/2MNPT return, to tank from filter
11 H34X84** (partial) 3/4X47,3/4MNPT supply, from tank to PTO pump