Wheatheart S2000 Post Pounder - Manual (Page 47)

W HEATHEART - P OST P OUNDER 7. M AINTENANCE
S2000 M ODEL
IM15 R1 47
7. Maintenance
Before performing any maintenance on this unit:
• shut off and remove key or lock-out the power source,
• ensure ballast box is lowered completely, and mast is secured with lock bars.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
Table 7.1 Standard Maintenance Schedule
MAINTENANCE DAILY WEEKLY ANNUALLY
Check cylinder bolts for tightness  - -
Tighten cylinder cap
 - -
Check hugger plastic rollers (replace if damaged)  - -
Check mast bolts for tightness -  -
Check top hammer stop bolts for tightness  - -
Check for cracks in frame  - -
Check that all hitch, linch and link pins are secured by hair-
pins where required  - -
Check for main pivot pin tightness  - -
Inspect PTO pump condition  - -
Inspect hydraulic cylinder seals
 - -
Inspect hydraulic hoses and connectors  - -
Inspect hydraulic oil (level and condition)  - -
Change oil filter
a - - 
Add or change hydraulic oil
b - - -
a. Annually or more often, according to usage. See “Changing the Oil Filter (PTO Kit)” on page 48.
b. As required. See “Adding or Replacing Hydraulic Fluid (PTO Kit)” on page 48.