Wheatheart S2000 Post Pounder - Manual (Page 37)

W HEATHEART - P OST P OUNDER 5. P LACEMENT
S2000 M ODEL
IM15 R1 37
5. Placement
Follow this procedure when placing pounder into its working position:
1. Review the work area safety diagram (Figure 2.2) prior to starting work.
Follow all set-up instructions and do not allow any unauthorized people into
the working area.
2. Be sure there is enough clearance from overhead obstructions, power lines,
or other equipment to move the machine into its working position.
3. Position machine in the desired post area.
4. Lower the 3-point hitch and ensure that both of the post pounder’s support
legs are securely on the ground.
5. Set park brake on tractor before dismounting.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
WARNING
Stay away from overhead or buried power
lines. Arcing and possible electrocution can
occur without direct contact.
WARNING
Consult local utility companies for location of
buried power lines and gas lines before
operating machine.
CAUTION
Pounder must have both support legs
securely on the ground before using machine.
WARNING
Use extreme care and minimum ground speed
when operating or transporting on hillsides,
over rough ground, or near ditches or fences.