Great Plains 2S-2600HDF Predelivery Manual - Manual (Page 16)

14 2S-2600HD Great Plains Manufacturing, Inc.
195-069Q 08/01/2007
Install Press Wheels
Refer to Figure 13
1. Remove 1 ⁄
2
x3 3 ⁄
4
inch flange bolt and flange lock nut
from each opener body.
2. Leave pivot bushing components in place and bolt
press wheel arm to opener with 1 ⁄
2
x3 3 ⁄
4
inch flange
bolt and lock nut . Repeat for all openers.
3. Remove 5 ⁄
8
inch bolt from each press wheel arm
and use bolts to assemble press wheels to press
wheel arms.
Two Outlet Kit
If the Two-Outlet Hydraulic Kit was ordered, install it now
(before the markers, as this kit contains items needed
when both 2-outlet and markers are installed).
Installation instructions are provided in a separate man-
ual with the Two-Outlet kit.
Figure 13
Press Wheel Assembly
24432
1
2
3
4
5
6
1
2
3
4
1 2
5 4
6
Figure 14
Two-Outlet Selector
27020