Leveling the planter, Center frame l/r leveling, Wing leveling – Great Plains 3P4025AH Operator Manual User Manual
Page 23: Center frame l/r leveling wing leveling
Great Plains Manufacturing, Inc.
Preparation and Setup
19
2014-07-29
411-099M
Leveling the Planter
Check and adjust level in field conditions on level ground.
Center Frame L/R Leveling
1.
Hitch the planter to a tractor (page 15).
2.
Raise the planter. Unfold it (page 26).
Refer to Figure 8
3.
Adjust the tractor 2-point lift arms so that the center
section tool bar is level.
Wing Leveling
Refer to Figure 9
4.
Check wing for level at the top of the tool bar.
Refer to Figure 10
To adjust wing level:
5.
Loosen the jam nut
at the upper link arm adjuster.
6.
Remove bolt
and rotate lock plate
clear of
adjust nut
.
7.
Rotate the adjust nut until the wing is level.
8.
Secure the jam nut.
9.
Re-install lock plate.
If a wing is adjusted, it may be necessary to adjust the
gauge wheel. See “Gauge Wheel Adjustments” on
page 45.
Figure 8
Center Section Level
36097
Figure 9
Wing Level
36097
1
1
2
3
4
Figure 10
Turnbuckle Adjuster
36098
1
4
2
3