Great Plains 3P4025AH Operator Manual - Manual (Page 33)

Great Plains Manufacturing, Inc. Table of Contents Index Operating Instructions 29
2014-07-29 Table of Contents Index 411-099M
Loading Seed, continued
Possible Agricultural Chemical Hazards:
Read and follow all supplier cautions for safe handling of
treated seed.
Irritant and Chronic Exposure Hazards:
Do not mix lubricants into seed with hands or any part of
body. Wear protective equipment. Use tools. See page 95.
7. Pre-mix seed and lubricant. For clean seeds other
than milo, cotton, and sunflowers sprinkle
1 ⁄
4
cup of
Ezee Glide Plus per bushel or unit (60 ml per
35 liters) of seed.
For milo, cotton, and sunflowers double the
application to
1 ⁄
2
cup (or more) per bushel or unit
(120 ml per 35 liters) of seed.
Population Risk:
The seed must be properly lubricated, starting with the first
seed through the meter. If unable to pre-mix prior to loading,
pre-mix at least one gallon (4 liters) per hopper, and load this
seed first. Fill the hoppers to half full with fresh seed. Add half
the lubricant and stir. Complete filling the hoppers and
sprinkle the remaining lubricant on top.
8. Add seed and lubricant to hoppers.
Refer to Figure 18 and Figure 19 on page 28
9.
Close lids. Position front end of lid over front end lip
of hopper. Snap lid firmly in place.
Figure 20
Adding Seed Lubricant
34710
Figure 21
1.6 bu.Hopper
32447