Great Plains NP4000 40-foot Operator Manual - Manual (Page 34)

407-776M Table of Contents Index 2012-03-28
30 NP4000 Table of Contents Index Great Plains Manufacturing, Inc.
Operating Instructions
This section covers general operating procedures.
Experience, machine familiarity and the following
information will lead to efficient operation and good
working habits. Always operate farm machinery with
safety in mind.
Pre-Start Checklist
High Pressure Fluid Hazard:
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings before
applying pressure. Fluid escaping from a very small hole can
be almost invisible. Use paper or cardboard, not body parts,
and wear heavy gloves to check for suspected leaks. If injured,
seek immediate medical attention from a physician familiar
with this type of injury.
This checklist presumes that the nurse tank is not yet
connected.
1. Carefully review “Important Safety Information”
starting on page 1.
2. Lubricate fertilizer applicator as indicated under
“Lubrication and Scheduled Maintenance” on
page 87.
3. Check all tires for proper inflation. See “Tire
Inflation Chart” on page 104.
4. Check all bolts, pins and fasteners. Torque as shown
in “Torque Values Chart” on page 105.
5. Check fertilizer applicator for worn or damaged
parts. Repair or replace parts before going to the
field.
6. Check hydraulic hoses, fittings and cylinders for
leaks. Repair or replace before going to the field.