Great Plains 3N-4025P Operator Manual - Manual (Page 53)

4/23/2010 196-286M
51 Adjustments
Refer to Figure 70
6. While the meter is removed take time to in-
spect the meter drive chain and sprocket.
Refer to Figure 71
7. Install the new meter along with the lower sec-
tion of the sliding seed tube.
Refer to Figure 72
8. Engage the upper latch. Make sure the ta-
pered line-up pins near drive sprocket engage
completely in line-up holes.
21917
21923
21922
Figure 71
Figure 72
Figure 70