Great Plains 3N-4025P Operator Manual - Manual (Page 87)

4/23/2010 196-286M
85 Maintenance and Lubrication
Talc Lubricant (821-046C)
All talc is not created equal, use Great Plains brand
talc for optimum seed flow.
Talc lubricant is mandatory for all seeds, especially
treated or inoculated seed.
Recommended usage:
For clean seeds sprinkle one cup of talc per 3 bush-
els of seed.
For seed with excessive treatment, or for humid
planting environments, double or triple talc rate as
needed.
Do not use hands or any part of your body to mix talc lu-
bricant.
Graphite Lubricant (821-042C)
For Milo Planting Only
Powdered graphite must be mixed with the milo
seed in combination with talc for proper seed
singulation.
Recommended usage:
For clean seeds sprinkle one cup of graphite per 9
bushels of seed.
For seed with excessive treatment, or for humid
planting environments, double or triple graphite
rate as needed.
Do not use hands or any part of your body to mix
graphite lubricant.
Drive Chains
Use care not to spray inside of meter.
Type of Lubrication: Chain Lube
Quantity = Coat thoroughly
As
Required
18286
Wheel and Coulter Hub Bearings
Type of Lubrication: Grease
Quantity = Repack
19109
Seasonally