Great Plains 800EW Operator Manual - Manual (Page 7)

Before You Start 5
02/24/2010 175-253M
Before You Start
Drill Compatibility
Refer to Figure 2
1.
Check the drill serial number plate to ensure that
the model number is either 800-1275 or 800-1506.
These kits are not compatible with other row spac-
ings, nor with model 3P806NT.
2. Check to see if an Accessory Drive system is
already installed (which is the case if a Main Box Agi-
tator and/or Small Seeds is installed).
The 175-248A and 175-250A kits require that an
Accessory Drive already be present.
The 175-249A and 175-251A kits include an Acces-
sory Drive.
Tools Required
• updated drill Parts manual (below) for parts I.D.
• suitable tractor for positioning and lowering drill
• chain lube
• a hoist, or at least four (4) people for large assembly
placement
• basic hand tools, including:
snap ring pliers
punch(es) for seating
5 ⁄
32
in and 1 ⁄
4
in roll pins
Related Documents
To assist installation, and for complete and up-to-date
operating instructions for your fertilizer option, make sure
you have the current editions of the following manuals.
Updates are available on the Great Plains web, from your
dealer, or directly from Great Plains.
Installing Multiple Options?
If you are also installing a Main Box Agitator and/or the
Small Seeds attachment, perform the work in this order:
A. Agitator
B. Fertilizer
C. Small Seeds
175-057M 800EW Owner’s Manual
175-057B 800EW Seed Rate Charts
175-057P 800EW Parts Manual
Figure 2
Serial Number, Accessory Drive
29566
2
1
1
2