Bio-Rad Bio-Plex Pro™ TGF-β Assays - Manual (Page 29)

27
b. Enter a dilution factor of 4 and click Calculate. The concentrations
for each standard point will be populated for all analytes in the table.
c. Optional: enter the lot number of the vial of standards into the
Standard Lot box and click Save.
5. Click Enter Controls Info, and for user-defined controls, select
an analyte from the pull-down menu, then enter a description and
concentration. Repeat for each additional analyte in the assay.
6. Click Enter Sample Info and enter sample information and the
appropriate dilution factor.
Fig. 4. Plate formatting.