Acronis Snap Deploy 5 - User Guide - Manual (Page 100)

100 Copyright © Acronis International GmbH, 2002-2014
c) Deployment server license
d) Machine server license
If you change the second setting from Use a machine license automatically to Stop deployment, the
software will use only deployment licenses. The software will use the following priority:
a) Deployment workstation license
b) Deployment server license
10.3.1.4 Using Acronis Universal Deploy
Specify whether you want to use Acronis Universal Deploy during deployment.
To configure this setting:
1. Select whether to use Acronis Universal Deploy.
Acronis Universal Deploy will help you to create a bootable Windows or Linux clone on different
hardware by automatically installing the necessary system drivers. Use Acronis Universal Deploy
when deploying the operating system to a machine with a dissimilar processor, different
motherboard, or other mass-storage device than in the imaged system. For detailed information,
see “What is Acronis Universal Deploy” (p. 26).
Select whether to use Acronis Universal Deploy
In Windows, Acronis Universal Deploy uses three sources for drivers:

The Windows default driver storage folder (in the master image being deployed)

The driver repository, which is one or more network folders or removable media

The mass-storage device driver specified by the user