Acronis Snap Deploy 5 - User Guide - Manual (Page 42)

42 Copyright © Acronis International GmbH, 2002-2014

To run the deployment again, open the Deployment tasks view, select the task you created, and
then click Run on the toolbar.
For details about the Deployment tasks view, see “Managing deployment tasks” (p. 133).

To add more machines, open the Machines view and then click Add machines. You can add
machines by their physical addresses, known as MAC addresses.
Another way to add a machine to this view is to boot the machine so that it becomes ready for
deployment, as described in “Preparing the target machine” earlier in this section. You can then
turn off or restart the machine without performing deployment. The machine remains in the
view.
For details about the Machines view, see “Managing the list of machines” (p. 128).

To add more licenses for deployment, open the Licenses view and then click Add license on the
toolbar. Clicking Obtain license opens the Acronis Snap Deploy 5 Purchasing Web page.
For details about managing licenses, see “Using Acronis Snap Deploy 5 License Server” (p. 59).
For information about license types, see “Licensing policy” (p. 17).

To set up network booting of machines (instead of booting them from a media), open the PXE
server view, click Upload components to PXE, and then follow the steps similar to those
described in “Creating a bootable media” earlier in this section.
For details about setting up the network booting, see “Configuring Acronis PXE Server” (p. 71).