Acronis Snap Deploy 5 - User Guide - Manual (Page 90)

90 Copyright © Acronis International GmbH, 2002-2014
If selected and Acronis Snap Deploy 5 Management Agent is not installed in the system that the
master image contains, the management agent will be installed on a target machine after the
master image is deployed to it.
Having the management agent installed on a machine enables the online deployment on this
machine.
Target disk layout
This setting determines the target disk for deployment, and what space on the target disk will be
available for deploying the master image.
The preset is: Default disk
The selection Default disk means that the image will be deployed to the hard disk whose number in
the BIOS is 1. (Note for advanced users: for such disk, the hexadecimal value known as the physical
drive number is 0x80.)
You can specify a different disk by clicking Disk number in BIOS and then typing or selecting the disk
number.
Selecting the target disk and volume
If you selected a single volume (p. 87) for deployment, specify how to place that volume on the
target disk:

Replace all volumes: All existing volumes on the target disk will be deleted, and the entire disk
space (including the currently unallocated space) will be available for the volume you are
deploying.