Acronis Snap Deploy 5 - User Guide - Manual (Page 95)

95 Copyright © Acronis International GmbH, 2002-2014
Each machine will be assigned an IP address from the range. Make sure that the range is big
enough. If there are more target machines than IP addresses in the range, deployment to the
remaining machines will fail.
TCP/IP properties
If you have not selected to preserve the network settings of the master system settings, you can
specify the DNS server. You can specify the IP address of the DNS server, such as 192.168.0.1; or the
network name of the DNS server in Host name and Domain name, such as dns and example.com
respectively if your DNS server is dns.example.com.
You will be able to change the network settings later when you start the operating system on the
deployed machine.
User accounts
This setting determines the local user accounts that will be created on the target machines in
addition to the accounts that exist in the master system.
Each user account can be added to the Administrators, Power Users, or Users group. Here you have
an opportunity to add a unified administrator’s account to all the systems, if needed. The Remove
and Remove all buttons are provided to remove the accounts you specified.
The password complexity has to meet the password policy set for the master machine. To view or
edit the password policy on the master machine:
1. Click Start -> Control Panel -> Administrative Tools -> Local Security Policy.
2. Under Account Policies, click Password Policy.