Acronis Snap Deploy 5 - User Guide - Manual (Page 102)

102 Copyright © Acronis International GmbH, 2002-2014
10.3.1.5 Summary window
Check your settings in the summary window, and then click Save.
The summary window
10.3.2 Configuring default deployment settings
In the Default Deployment Settings window, you can specify the values that will be used by default
when you create a deployment template (p. 85).
To view or change the default deployment settings
1. Start Acronis Snap Deploy 5 Management Console.
2. On the Tools menu, click Configure default settings. If prompted, specify the name or IP address
of the machine where Acronis Snap Deploy 5 OS Deploy Server is installed, and the user name
and password of an administrator on that machine.
Each default setting has a preset value. To reset all default settings to their preset values, click Reset
all.
List of default settings
The following is the list of default deployment settings and their preset values.

Target disk layout (p. 90)
The preset is: Perform deployment to the first hard disk in the BIOS

Disk space utilization (p. 91)