Acronis Snap Deploy 5 - User Guide - Manual (Page 70)

70 Copyright © Acronis International GmbH, 2002-2014
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c
657de08&DisplayLang=en
Automated Installation Kit (AIK) for Windows 7 (PE 3.0):
http://www.microsoft.com/downloads/details.aspx?familyid=696DD665-9F76-4177-A811-39C26
D3B3B34&displaylang=en
Automated Installation Kit (AIK) Supplement for Windows 7 SP1 (PE 3.1):
http://www.microsoft.com/download/en/details.aspx?id=5188
You can find system requirements for installation by following the above links.
2. [Optional] Burn the WAIK to DVD or copy to a flash drive.
3. Install the Microsoft .NET Framework from this kit (NETFXx86 or NETFXx64, depending on your
hardware).
4. Install Microsoft Core XML (MSXML) 5.0 or 6.0 Parser from this kit.
5. Install Windows AIK from this kit.
6. Install Acronis Snap Deploy 5 Management Console on the same machine.
It is recommended that you familiarize yourself with the help documentation supplied with Windows
AIK. To access the documentation, select Microsoft Windows AIK -> Documentation from the start
menu.
7.2.2.4 Preparation: WinPE 4.0 and WinPE 5.0
To be able to create or modify PE 4 or 5 images, install Acronis Snap Deploy 5 Management Console
on a machine where Windows Assessment and Deployment Kit (ADK) is installed. If you do not have a
machine with ADK, prepare it as follows.
To prepare a machine with ADK
1. Download the setup program of Assessment and Deployment Kit.
Assessment and Deployment Kit (ADK) for Windows 8 (PE 4.0):
http://www.microsoft.com/en-us/download/details.aspx?id=30652.
Assessment and Deployment Kit (ADK) for Windows 8.1 (PE 5.0):
http://www.microsoft.com/en-US/download/details.aspx?id=39982.
You can find system requirements for installation by following the above links.
2. Install Assessment and Deployment Kit on the machine.
3. Install Acronis Snap Deploy 5 Management Console on the same machine.
7.2.2.5 Adding Acronis Snap Deploy 5 components to WinPE
To add the bootable components to WinPE ISO:
1. Start Acronis Snap Deploy 5 Management Console.
2. On the Tools menu, click Create PE image.
3. Do one of the following:

If you do not have a PE image to base the media on, click Create WinPE automatically.

If you want to base the bootable media on a specific PE image, click Use WinPE files located
in the folder I specify, and then specify the folder with the WIM file of the image.
4. In Network settings, specify whether Acronis Snap Deploy 5 Agent will connect to a particular
Acronis Snap Deploy 5 OS Deploy Server.
5. In Autostart, specify whether to start Acronis Snap Deploy 5 Agent automatically after a
time-out.