Acronis Snap Deploy 5 - User Guide - Manual (Page 76)

76 Copyright © Acronis International GmbH, 2002-2014
The manual configuration is needed if automatic configuration is not possible (no DHCP server on
the network) or does not succeed. To configure the network connections manually, click OK in
the prompt window.
Acronis Snap Deploy 5 Master Image Creator configuration: network settings
Set the preferable values and click OK.
7. When Acronis Snap Deploy 5 Master Image Creator starts, it displays the Master Image Creator
welcome window.
8. In this window, click Next, and then follow the steps of the Master Image Creator wizard (p. 76).
8.5 Steps of the Master Image Creator wizard
This section describes the steps of the Master Image Creator wizard in the order that they appear.
Use the Next and Back buttons to go between steps.
8.5.1 Disks or volumes to image
Select the disks or volumes that you want to include in the master image.
You can select any set of disks and volumes. The master boot record (MBR) will be also included in
the image.
Important: An operating system includes a loader: a small program that loads the main part of the operating
system. The loader and the rest of the operating system may reside on different volumes. For example,