Expansion card installation guidelines – Dell PowerEdge T610 User Manual

Page 119

Advertising
background image

Installing System Components

119

Three full-height, half-length PCIe x4 (slots 1, 4, and 5)

To identify expansion slots, see Figure 6-1.

Expansion Card Installation Guidelines

Observe the following notes and guidelines regarding the expansion-card
slots:

The expansion-card slots are not hot-swappable.

PCI Express Generation 2 and Generation 1 expansion cards are supported
in all slots.

Although slots 1, 4, and 5 are physically PCIe x8 connectors, they function
only as PCIe x4 link slots.

Slots 2 and 3 support full-length expansion cards; slots 1, 4, and 5 support
half-length expansion cards.

The system supports up to two SAS or PERC expansion cards (in addition
to the integrated storage controller) to manage internal tape drives or
external storage.

CAUTION:

To ensure proper cooling, no more than two of the five expansion

cards can have a power consumption of greater than 15 W (up to 25 W maximum
each), not including the integrated storage controller.

Table 3-1 provides a guide for installing expansion cards to ensure proper
cooling and mechanical fit. The expansion cards with the highest priority
should be installed first using the slot priority indicated. All other
expansion cards should be installed in card priority and slot priority order.

Table 3-1.

Expansion-Card Installation Order

Card
Priority Card Type

Slot Priority

Max
Allowed

25-W
Card?

1

PERC 5/E controller

4,5

2

Y

2

PERC 6/E controller

3,2,5,4,1

2

Y

3

10 Gb NIC

4,5,1,2,3

2

Y

4

All other Dell storage cards

3,2,4,5,1

2

Y

5

Non-Dell storage cards

4,5,1,2,3

5

1

N

2

6

All other NICs

4,5,1,2,3

5

1

N

2

book.book Page 119 Tuesday, September 15, 2009 10:08 AM

Advertising