Dell PowerEdge T610 - Manual (Page 50)

50
About Your System
Timer chip
counter 2 failed
Faulty system board. See "Getting Help."
TPM
configuration
operation
honored. System
will now reset.
A TPM configuration
command has been entered.
The system will reboot and
execute the command. Information only.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed. Enter I or M to proceed.
TPM failure A Trusted Platform Module
(TPM) function has failed. See "Getting Help."
Table 1-2. System Messages (continued)
Message Causes Corrective Actions
book.book Page 50 Tuesday, September 15, 2009 10:08 AM