Integrated devices screen, Options. see "integrated devices screen – Dell PowerEdge T610 User Manual

Page 64

Advertising
background image

64

Using the System Setup Program and UEFI Boot Manager

Integrated Devices Screen

Boot Sequence Retry
(Disabled default)

If this field is enabled and the system has failed to boot,
the system will reattempt to boot after 30 seconds.

Option

Description

Integrated SAS/RAID
Controller
(Enabled default)

Enables or disables the integrated storage controller.

User Accessible USB Ports
(All Ports On default)

Enables or disables the user-accessible USB ports.
Options are All Ports On, Only Back Ports On, and All
Ports Off.

Internal USB Port
(On default)

Enables or disables the internal USB port.

Internal SD Card Port

Enables or disables the internal SD card port.

Embedded NIC1 and
NIC2

Enables or disables the OS interface of the two
embedded NICs. (The NICs may also be accessed
through the system’s management controller.)

Embedded Gb NIC

x

(NIC1 default: Enabled
with PXE;
NIC 2: Enabled)

Enables or disables the embedded NICs. Options are
Enabled, Enabled with PXE, Enabled with iSCSI Boot,
and Disabled. PXE support allows the system to boot
from the network.

MAC Address

Displays the MAC address for the NIC.

Capability Detected

Displays the features of the LOM and the NIC hardware
key (if installed).

NOTE:

Some LOM features may require a NIC hardware

key.

Option

Description

book.book Page 64 Tuesday, September 15, 2009 10:08 AM

Advertising